REV E BOARD CONNECTOR PINOUTS
Checked vs final schematic 5/9/00 ESH



DC POWER (MAIN) - J90 - 10 pin 2mm header

 1 - Analog power
 2 - Analog GND (1 ohm)
 3 - Analog VR output (3.3V)
 4 - Analog GND (direct)
 5 - n.c.
 6 - n.c.
 7 - Digital power
 8 - Digital GND (1 ohm)
 9 - Digital VR output (5.0V)
10 - Digital GND (direct)


TDC READOUT (DIG PWR AUX) - J92 - 14 pin 2mm header

 1 - CLK+
 2 - CLK-
 3 - ENC_CTRL+
 4 - ENC_CTRL-
 5 - STRB_OUT+
 6 - STRB_OUT-
 7 - DATA_OUT+
 8 - DATA_OUT-
 9 - SHIELD (DGND via R+C)
10 - SHIELD
11 - Digital Power In (Optional)
12 - DGND
13 - Digital VR output (5.0V)
14 - DGND


JTAG OUTPUT - J20 - 10 pin 2mm header

 1 - TDO+
 2 - TDO-
 3 - TCK+
 4 - TCK-
 5 - TMS+
 6 - TMS-
 7 - TRST+
 8 - TRST-
 9 - SHIELD (DGND via R+C)
10 - SHIELD


JTAG INPUT - J21 - 10 pin 2mm header

 1 - TDI+
 2 - TDI-
 3 - TCK+
 4 - TCK-
 5 - TMS+
 6 - TMS-
 7 - TRST+
 8 - TRST-
 9 - SHIELD (DGND via R+C)
10 - SHIELD


XILINX PROGRAMMING/TEST - J93 - 14 pin 2mm header

 1 - I/O16
 2 - I/O15
 3 - I/O14
 4 - I/O13
 5 - I/O12
 6 - I/O11
 7 - I/O10
 8 - I/O9
 9 - TCK (prog)
10 - TMS (prog)
11 - TDI (prog)
12 - TDO (prog)
13 - Digital Power (5.0V)
14 - Digital GND